Current:Home > NEWS > Company news
Refine installation specifications and develop energy fiber —— Suzhou Zhanheng intelligent testing machine delivery full-cycle control guide
[2026-11-10]

Refine installation specifications and develop energy fiber —— Suzhou Zhanheng intelligent testing machine delivery full-cycle control guide

POY/FDY multifunctional testing machine and composite spinning multifunctional testing machine are the core precision equipment for polymer fiber research and development and formula verification. Suzhou Zhanheng Intelligent, relying on many years of on-site delivery experience, summarizes the key control points of installation and debugging, helps customers standardize operations, avoid risks, and ensures long-term stable operation of equipment and accurate and reliable test data.

First, preparation before entering the site: build a solid installation foundation.

Plan ahead the installation area that is flat, solid and up to standard in bearing capacity, away from strong vibration sources, and provide supporting damping bases; Keep the laboratory clean and ventilated, control the temperature and humidity, and avoid direct sunlight equipment; Reserve sufficient operation and maintenance space. Verify power supply capacity and grounding protection, and configure independent circuits; Laying cooling water and compressed air pipelines in advance and checking indicators, and planning oil supply and waste collection stations simultaneously. Check and accept against the list after arrival, communicate in time if it is abnormal, and do not carry out assembly directly.

Second, mechanical installation: the core of strict control accuracy

After the main engine is in place, calibrate the levelness with a precision spirit level, adjust the locking of the anchor bolts several times, and strictly control the error to prevent the frame from shaking. The compound spinning machine focuses on checking the relative position and coaxiality of double extrusion units and spinning boxes to ensure uniform melt distribution. When assembling the spinning assembly and metering pump, clean the assembly surface and lock the bolts diagonally. Check the parallelism of the drafting roll, and adjust the distance of the side blowing air ring according to the process standard to ensure the uniform cooling wind field. The melt pipeline should be kept pressure and leak-checked, and the hot and cold pipelines should be arranged in different zones to avoid interference with the silk road.

Third, electrical debugging: to prevent interference hidden dangers

Power cables are routed separately from signal wires, and shielded cables are grounded regularly to reduce electromagnetic interference. Check the terminal identification after wiring, and verify the functions of interlocking devices such as emergency stop and safety protection door; Test the communication link of the control system, and enter the heating link after all safety protection is qualified.

Four, phased debugging: progressive verification performance

Strictly follow the order of "single machine no load-system linkage-low temperature preheating-feeding trial spinning", and it is forbidden to directly raise the temperature and feed. No-load test the running state and speed stability of each unit; Linkage debugging and simulation of the whole process, troubleshooting logic anomalies; Step heating and preheating, emptying the water vapor impurities in the pipeline; Feeding trial spinning gives priority to low-speed adaptation of raw materials, multi-dimensional adjustment is made to solve the problems of broken wires and poor forming, and the composite spinning machine type is compared with the consistency of two-way melt, and a complete test record is made.

V. Safety and Delivery: Full escort

Wear labor protection articles during the whole operation, beware of scalding during high temperature operation, and keep the passage unblocked at the commissioning site. Conduct systematic training after the commissioning reaches the standard, deliver operation manuals, electrical drawings and other materials, and complete the acceptance and handover.

Suzhou Zhanheng Intelligent always adheres to precision manufacturing and standardized delivery, and helps customers to efficiently promote the research and development of new materials with standardized installation, debugging and control. In the future, we will continue to provide remote technical support, on-site maintenance and process optimization services to empower fiber R&D and innovation.


【Return】


Follow us

Website

WeChat

苏州展衡智能科技有限公司Support:优网科技 苏ICP备20043162号-1